ZyXEL Communications IP PBX X6004 - Manual (Page 456)

Chapter 33 Remote Management
X6004 User’s Guide
456
33.5 The SSH > Add/Edit Screen
Use this screen to add trusted computer(s) which is allowed to access your X6004
using SSH. Click the add or edit icon in the Maintenance > Administration >
Remote Management > SSH screen.
Figure 262 SSH > Add/Edit
The following table describes the labels in this screen.
Address This field displays trusted computers’ IP addresses that is allowed to
communicate with the X6004 using this service.
0.0.0.0 displayed means all computers are allowed to access the X6004
using this service.
An IP address displayed (for example, a.b.c.d) means only the computer
is allowed to access the X6004 using this service.
An IP address with a subnet mask displayed (for example, a.b.c.d/
255.255.255.0) means only the computers in the subnet network are
allowed to access the X6004 using this service.
Add Click Add to add a new trusted computer record.
Edit Click Edit to modify a trusted computer record.
Delete Click the Delete icon to delete a single record in this table. Alternatively,
select one or multiple records and click the Delete button to delete
record(s) at one time.
Table 178 Remote Management > SSH (continued)
LABEL DESCRIPTION
Table 179 SSH > Add/Edit
LABEL DESCRIPTION
Access
Interface Select the interface(s) through which computer(s) may access the
X6004 using this service. Select ALL to allow the specified computer(s)
to access the X6004 through either LAN or WAN interface.
Address Type Select ALL to allow any computers to access the X6004 using this
service.
Select Host and specify the IP address of a trusted computer to allow
the computer to access the X6004 using this service.
Select Subnet and specify the IP addresses of a trusted subnet to allow
all computers from the subnet network to access the X6004 using this
service.