ZyXEL Communications IP PBX X6004 - Manual (Page 279)

Chapter 18 Outbound Line Group
X6004 User’s Guide
279
Each field is described in the following table.
18.2.1 Add/Edit FXO Trunk
The screens for editing or adding FXO trunks on the X6004 contain the same
fields. Only the screen used to add FXO trunks is shown below. Click the Add (or
Edit) icon in the FXO Trunk section of the Outbound Line Group configuration
screen to view the screen as shown.
Figure 142 Add/Edit FXO Trunk
Table 86 Outbound Line Management > Outbound Line Group
LABEL DESCRIPTION
FXO Trunk / PRI
Trunk / BRI
Trunk / SIP
Trunk / Trusted
Peer These headings divide the screen into sections based on the type of
outside line you have configured:
• FXO Trunk - refers to a connection from the X6004 to the PSTN
(your local telephone company) via the FXO port on the X6004.
• PRI Trunk - refers to a connection from the X6004 to the ISDN T1
or E1 trunk line via the PRI port on the X6004.
• BRI Trunk - refers to a connection from the X6004 to the basic rate
ISDN trunk line via the BRI port on the X6004.
• SIP Trunk - refers to a connection from the X6004 to a SIP server
at your VoIP service provider.
• Trusted Peer - refers to a connection to another SIP server (for
example another X6004) that has configured your X6004 as a
trusted peer.
Machine ID This field displays the ID of the X6004 on which an outside line is
configured.
Group Name This field displays the name of an outside line.
Description This field displays the description for an outside line.
Add, Advanced,
Edit, Delete,
Auto Attendant Select from one of the following choices:
• Add - to create a new outbound line group.
• Advanced - to configure the settings of an outbound line group.
• Edit - to change the description of an outbound line group.
• Delete - to remove an existing outbound line group.
• Auto Attendant - to assign an auto attendant to an outbound line
group.