ZyXEL Communications IP PBX X6004 - Manual (Page 438)

Chapter 30 Administrator Accounts
X6004 User’s Guide
438
30.3.1 Add an Administrator
Use this screen to create new administrator accounts. To access this screen, click
Maintenance > Administrator List > Add.
Figure 252 Administrator List > Add
Each field is described in the following table.
Table 170 Administrator List > Add
LABEL DESCRIPTION
Create a new
administrator
Username
Type a username for this administrator. You can use up to 20
alphanumeric characters. Spaces are not allowed. The first character
must be a letter.
Password Type a password for this administrator account. You can use up to 32
alphanumeric characters and spaces are not allowed.
Confirm
Password Retype the new password for this administrator account.
Description Type a short description for this administrator account. You can use up
to 63 alphanumeric characters. Spaces are allowed.
Rank Select the rank you want this administrator account to have. You can
select:
• Full admin - to allow this account to perform all configuration
changes on the X6004.
• Debug admin - if this account has the same privilege level as
the read only account . This type of account is reserved for use by
service technicians to perform additional diagnostics.
• Read only - to allow this account to only be able to view
configuration details on the X6004.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving your changes.