ZyXEL Communications IP PBX X6004 - Manual (Page 462)

Chapter 33 Remote Management
X6004 User’s Guide
462
The following table describes the labels in this screen.
33.10.1 The CTI Add/Edit Screen
Use this screen to add trusted ZyXEL CTI-compatible SIP phone(s) which is
allowed to access your X6004. Click the add or edit icon in the Maintenance >
Administration > Remote Management > CTI screen.
Figure 268 CTI > Add/Edit
Table 184 Remote Management > CTI
LABEL DESCRIPTION
Activate CTI
Remote
Management
White List Select this to allow only CTI-compatible SIP phones which use any IP
addresses listed in this screen to access your X6004.
# This field displays the index number of records in this table.
Access
Interface This field displays the interface(s) through which a CTI-compatible
device may access the X6004 using this service.
Address This field displays trusted CTI-compatible device’s IP addresses that is
allowed to communicate with the X6004 using this service.
0.0.0.0 displayed means all devices are allowed to access the X6004
using this service.
An IP address displayed (for example, a.b.c.d) means only the device is
allowed to access the X6004 using this service.
An IP address with a subnet mask displayed (for example, a.b.c.d/
255.255.255.0) means only the devices in the subnet network are
allowed to access the X6004 using this service.
Add Click Add to add a new trusted computer record.
Edit Click Edit to modify a trusted computer record.
Delete Click the Delete icon to delete a single record in this table.
Alternatively, select one or multiple records and click the Delete button
to delete record(s) at one time.