ZyXEL Communications IP PBX X6004 - Manual (Page 99)

Chapter 3 Tutorials
X6004 User’s Guide
99
3.7.6 Using the Web Phone (IP Phone Users Only)
Click the Web Phone tab at the top of the screen. If a screen similar to the
following displays, click Yes.
Figure 33 Tutorial: Security Pop-Up
The following screen displays.
Figure 34 Tutorial: The Web Phone
Note: Make sure you have a headset (or speakers and a microphone) connected to
your computer, and that your sound card is working correctly (try listening to an
audio file or recording a voice note to check, if there is a problem).
The following table describes how to use the web phone to perform some basic
phone functions.
Table 8 Tutorial: Basic Web Phone Call Features
FEATURE PROCEDURE
Dial a number Click each numeral using the mouse pointer. The number displays
on the screen. Use the “Clear” (
) button to delete a numeral.
Make a call Dial the number, then press the “Dial/Pick up” ( ) button.
Receive a call When a call is incoming, press the “Dial/Pick up” ( ) button.
End a call Press the “Hang up” ( ) button.
Adjust the speaker
volume Use the slider on the left of the keypad.