ZyXEL Communications IP PBX X6004 - Manual (Page 475)

Chapter 34 System File Maintenance
X6004 User’s Guide
475
Each field is described in the following table.
34.4 Technical Reference
This section shows some examples of uploading files to the X6004 using FTP
commands. First, understand the filename conventions.
Filename Conventions
Like the firmware upgrade function in the GUI, four types of files can be FTP
uploaded to the X6004 (See
Section 34.3 on page 474 ):
Regardless of which file you want to upload to the X6004, you must first rename it
to the internal firmware file name on the X6004: ZLD-current.
Example FTP Commands
Do the following to upload the firmware and configuration file to the X6004:
Table 187 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Information This section displays information about the firmware currently installed
on the X6004.
Boot Module: This field indicates the version of the boot module installed on the
X6004. The boot module is software that tells the X6004 how to install
and run the firmware. Each firmware release only works when the
proper boot module is installed on the X6004.
Current Version This field indicates the firmware version number.
Released Date
This field indicates the date and time that the currently installed
firmware on the X6004 was released.
Select Upload
File Use this section to upload new firmware to the X6004.
File Path Enter the location of the .bin, .rom, .romd or .binromromd file you want
to upload, or click Browse... to find it. You must decompress
compressed (.zip) files before you can upload them.
Browse... Click this to find the .bin, .rom, .romd or .binromromd file you want to
upload.
Upload Click this to begin uploading the selected file. This may take several
minutes.
Note: Do not turn off the device while firmware upload is in
progress!