ZyXEL Communications IP PBX X6004 - Manual (Page 80)

Chapter 3 Tutorials
X6004 User’s Guide
80
3.4.1 The ISDN Connection
/This example assumes that the X6004 has an ISDN PRI interface card already
installed (refer to the Quick Start Guide) and that you have connected your
telephone cables to the outlets that connect to your local telephone company. The
front of your X6004 should look as shown in the following figure.
Note: In this example, a PRI interface card is installed in slot B and port 1 is used for
the connection. You will use this information in a web configurator screen later.
Figure 20 PRI Interface Card Connection
The following table describes our sample PRI information as provided by the
telephone service provider:
Table 4 Sample PRI Information
SWITCH TYPE NT/TE MODE LINEBUILDOUT FRAMING CODING
NET5 NT 120 CRC4 HDB3
ISDN