ZyXEL Communications IP PBX X6004 - Manual (Page 271)

Chapter 17 Group Access Code
X6004 User’s Guide
271
Each field is described in the following table.
17.2.1 The Group Access Code Screen
Use this screen to edit or create an access code on the X6004. To access this
screen, click the Edit or Add icons in the Group Access Code screen.
Figure 135 Group Access Code > Edit/Add
Each field is described in the following table.
Table 84 Extension Management > Group Access Code
LABEL DESCRIPTION
Enable Group
Access Code Select this to enable the group access code feature.
Apply Click this to save your changes.
Delete Check the Delete box and click Delete to remove this call access code
setting.
Group This field displays an authority group name that has been set up with an
access code.
Access Code This field displays the access code.
Add, Edit,
Delete Click one of the following options:
• Add - to set up an access code for an authority group on the X6004.
• Edit - to change the access code for an authority group.
• Delete - remove an access code configured for an authority group.
Table 85 Access Code > Edit/Add
LABEL DESCRIPTION
Group Select the authority group you want to configure a call access code for.
You can only create one call access code per authority group.
Access Code Type the access code for this authority group.
Apply Click this to save your changes.
Cancel Click Cancel to return to Group Access Code screen without saving
your changes.