ZyXEL Communications IP PBX X6004 - Manual (Page 365)

Chapter 23 ZyStack
X6004 User’s Guide
365
The following table describes the labels in this screen.
23.2.2 ZyStack Edit Screen
Use this screen to edit the serial number or description of an existing ZyStack
member. Click the Edit icon in the Configuration > ZyStack > Setting screen
to view the screen as shown.
Figure 214 ZyStack Edit
Table 131 ZyStack Add
LABEL DESCRIPTION
Serial Type the serial number of the X6004 you want to add to the ZyStack. You
can get the serial number by clicking on the edit icon in the
Configuration > ZyStack > Setting screen of an X6004 that is not part
of a ZyStack.
Description Type a description for this ZyStack member.
WAN IP Type the WAN IP address of the X6004 you want to add to the ZyStack.
LAN IP Type the LAN IP address of the X6004 you want to add to the ZyStack.
Z_Interface This field is only configurable for the ZyStack master. It displays whether
the interface on the master X6004 is LAN or WAN for the ZyStack.
Add Click Add to save your changes to the X6004.
Cancel Click Cancel to go back to the previous screen without saving your
changes.
Reset Click Reset to clear the fields and begin configuring anew.