ZyXEL Communications IP PBX X6004 - Manual (Page 436)

Chapter 30 Administrator Accounts
X6004 User’s Guide
436
30.2 The Logged-In Administrator Screen
Use the Logged-In Administrator screen to change the password of the
currently logged in administrator. Click Maintenance > Logged-In
Administrator to view the screen as shown next.
Figure 250 Maintenance > Logged-In Administrator
Each field is described in the following table.
Table 168 Maintenance > Logged-In Administrator
LABEL DESCRIPTION
Old Password Type the existing password for the currently logged in administrator
account.
Username Type the new username of the currently logged in administrator
account. You can use up to 20 alphanumeric characters. Spaces are not
allowed and the first character must be a letter.
Password Type a new password for the currently logged in administrator account.
You can use up to 32 alphanumeric characters and spaces are not
allowed.
Confirm
Password Retype the new password for the currently logged in administrator
account.
Apply Click this to save your changes and to apply them to the X6004.
Cancel Click this to begin configuring the fields again.