West Control Solutions KS98-1 - Manual (Page 22)

I-5.2 Retro-fitting and modific. of I/O-ext. (* watch connecting diagram )
Only for instruments with modular option C!
l
The instrument contains electrostatically sensitive
components. Original packing protects against elec-
trostatic discharge (ESD), transport only in original
packing.
– When mounting, rules for ESD protection must be
taken into account.
Connection:
KS 98-1 engineering must be taken into account, be-
cause it determines pin allocation and signification of
connections.
Moreover, the rules for the performance limits must
be followed (see manual r 9499-040-82711).
Mounting
After releasing the locking screw, withdraw the KS
98-1 module from the housing.
a Insert the module into the required socket with the
printed label pointing down-wards into the green
connector and click it in position in the small, white
contact b at the top.
I-5.3 I/O extension with CANopen
The unit offers a CANopen-compliant interface port for connection of the RM 200 system, KS 800 or additional KS 98-1
units with max. five CAN nodes. See installation notes in the CANopen system manual (9499-040-62411).
Mounting 9499-040-82711
I-22 Retro-fitting and modific. of I/O-ext. (* watch connecting diagram )
13
15
+
_
+
_
+
_
1 (12)
4 (14)
A
INP1
Connection 2-wire-transducer (e.g. INP1)
di 1
di 2
2
3
+
_
1 (12)
4 (14)
A
*
B
1
3
4
di 3
di 4
(O
p
tion)
Energizing digital inputs (e.g. di1...di4)
Fig. 7 Mounting of i/o modules
socket
*)
4 3 2 1
00201
R_Inp
8368
00201
R_Inp
8368
The various modules can
be identified by the printed
label.
The last 5 digits of the
order number are given in
the upper line.