West Control Solutions KS98-1 - Manual (Page 303)

III-20.3 R_Inp (analog input card )
Analog input card for Pt100/1000, Ni 100/1000, resistance and potentiometer
Analog input, plugs into modular options card C. The R_INP is used for configuration and parameter setting of analog
inputs
R_INP. Input calculation is fixed to once per time slot.
Digital inputs:
lock
calibration disabled
hide calibration display suppressed
Digital outputs:
slotid
0 = correct module inserted
1 = wrong module inserted
fail_a(b)
0 = no measurement error at channel a (b) detected
1 = measurement error at channel a (b) ; e.g. sensor break
a/m_a(b)
Status of manual key (H)r 0 = automatic
Status of manual key (H)r 1 = manual
inc_a(b) =1 rI-key pressed
dec_a(b) =1 rD-key pressed
Analog inputs:
Y_a(b)
position feedback
Modular I/O - extension-modules 9499-040-82711
III-303 R_Inp (analog input card )
Fail_a
XaFail X0_a
X100_a
Tfm_a Xakorr
x1a in
x1a Out
x2a in
x2a out
dec_a
inc_a
a/m_a
fail_a
Inp_a
Typ_a
Unit_a
STK_a
Tkrefa
slotid
Cal
Fail_a
XaFail X0_a
X100_a
Tfm_a Xakorr
x1a in
x1a Out
x2a in
x2a out
dec_a
inc_a
a/m_a
fail_a
Inp_a
Typ_a
Unit_a
STK_a
Tkrefa
Cal
a
b