West Control Solutions KS98-1 - Manual (Page 289)

III-18.4 DIGOUT ( digital outputs (No. 122))
Function ‘DIGOUT’ is used for digital output configuration and parameter setting. It is firmly allocated to block number
95 and is calculated invariably in each time slot. Inversion of each individual signal can be configured. If all digital out -
puts are provided is dependent the KS 98-1 hardware option.
Inputs
Digital inputs:
d1...d4
Signal sources for control of digital outputs do1 to do4.
(Digital outputs do1 to do4 are provided only in units with hardware option B).
d1...d4
Signal sources for control of digital outputs do5 and do6.
(Digital outputs do5 and do6 are provided only in units with hardware option C).
Parameter and configuration data
Parameter Description Values Default
Inv1 Transfer behaviour for d1
direct output direct t
inverted output inverse
Inv2
Transfer behaviour for d2 direct output direct t
inverted output inverse
:
: :
: :
: :
: :
:
Inv6
Transfer behaviour for d6 direct output direct t
inverted output inverse
Outputs 9499-040-82711
III-289 DIGOUT ( digital outputs (No. 122))
HARDWARE SOFTWARE
Mode1
d1
d2
d3
d4
d5
d6