West Control Solutions KS98-1 - Manual (Page 275)

Parameter and configuration data
Parameter Description Values Default
x1in Measured value correction P1, input -29999 ... 999 999 0
x1out Measured value correction P1, output -29999 ... 999 999 0
x2in Measured value correction P2, input -29999 ... 999 999 100
x2out Measured value correction P2, output -29999 ... 200000 100
Configuration Description Values Default
Type
Type L -200...900 °C Type L
Type J -200...900 °C Type J
Type K -200...1350 °C Type K
Type N -200...1300 °C Type N
Type S -50...1760 °C Type S
Type R -50...1760 °C Type R
Type T -200...400 °C Type T
Type W 0...2300 °C Type W
Type E -200...900 °C Type E
Type B 0...1820 °C Type B
Pt 100 -99,9...850,0 °C Pt100 850
Pt 100 -99,9...250,0 °C Pt100 250
2x Pt 100 -99,9...850 °C 2Pt100 85
2x Pt 100 -99,9...250,0 °C 2Pt100 25
0...20 mA 0...20mA t
4...20 mA 4...20mA
0...10 V 0...10V
2...10 V 2...10V
Transducer 0...500 [ Pot.trans
Resistance 0...500 [ linear 0..500Ohm
Resistance 0...250 [ linear 0..250Ohm
Fail
Fail function off disabled
Digital output fail = 1, y1 = x100 Upscale t
Digital output fail = 1, y1 = x0 Downscale
Digital output fail = 1, y1 = XFail Subst.val.
Xkorr
Measured value correction off off t
Measured value correction adjustable on
Unit
Unit = °C only effective with
thermocouple and Pt100 setting
°C
t
Unit = °F
°F
STK
Internal temperature compens. only effective with
thermocouple
int.CJC t
External temperature compens. ext.CJC
x0 Physical value at 0% only effective with standard
signals (0/4..20mA or 0/2..10V)
-29999 ... 999 999 0
x100 Physical value at 100% -29999 ... 999 999 100
XFail Substitute value with sensor error -29999 ... 999 999 0
Tfm Filtertime constant [s]
0 ... 999 999 0,5
Tkref Reference temperature at STK = ext.TK 0 ... 140 0
Measured value conditioning
Before the pre-filtered (time constant ...; limiting frequency ...) analog
input signals are available as digitized measurement values with
physical quantiy, they are subjected to extensive measured value
conditioning.
Inputs 9499-040-82711
III-275 AINP1 ( analog input 1 (No. 08))
y1
Unit
STK
Tkref
Typ XFail
Fail x0
x100
Tfm
x2out
Xkorr
x2in
x1out
x1in