Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 106)

106 Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
Chapter 8 Frame 12 Mechanical Installation
Remove the Protective
Covers Move the Control Frame
To gain access to the power wiring terminals, airflow plate and protective covers
you may need to move the control frame out of the way. If you do not need to
move the control frame, continue with Remove the Airflow Plate on page
107 .
Task Description
Loosen the T8 Torx-head screws that secure the control frame to the drive enclosure (Remove screws on
early frame 10 drives).
Swing the control frame out and away from the power structure.
A
B
A
B
A