Remove the protective screens – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives User Manual
Page 142
Advertising
142
Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
Chapter 10
Frame 14 Mechanical Installation
Remove the Protective
Covers from the Converter
Unit(s)
Remove the Protective Screens
To access the components within the converter unit(s), you must first remove the
protective screens from the drive.
•
Remove the screws that secure the protective screens to the converter
unit(s) and remove the screens.
1500A Drive Shown
Remove screws
and screens
Advertising
This manual is related to the following products: