Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 145)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 145
Frame 14 Mechanical Installation Chapter 10
Remove the Protective Covers
You must remove the protective covers to gain access to the converter unit(s).
• Remove the four M5 POZIDRIV screws that secure each of the two or
three main and bottom protective covers to the drive, then remove the
protective covers.
DC B US CONDUCT
ORS AND CAP
ACIT ORS
OPERA TE A T HIGH
VO LTA GE. REMO VE PO WER
AND WAIT 5 MINUTES BEFORE S
ER VICING
DANGER !
DC B US CONDUCT
ORS AND CAP
ACIT ORS
OPERA TE A T HIGH
VOL TAG E. REMO
VE PO WER
AND W AIT 5 MINUTES BEFORE SER
VICING
DA NGER
!
DC B US CONDUCT
ORS AND CAP
ACIT ORS
OPERA TE A T HIGH
VOL TAG E. REMO
VE PO WER
AND W AIT 5 MINUTES BEFORE SER
VICING
DANGER !
Remove screws and covers
Remove screws and covers