Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 161)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 161
Frame 14 Mechanical Installation Chapter 10
3. The MCCBs can now be closed. Continue with Closing the Circuit
Breakers and Energizing the Drive on page
161 below.
Closing the Circuit Breakers and Energizing the Drive
1. Close and latch all enclosure doors.
2. Press the “Close” (green) control button on the enclosure door.
3. The circuit breakers can be opened by pressing the “Open” (red) control
button on the enclosure door.
The motor operators are automatically recharged when they are opened.
P us h On P us h Off
OFF DI S CHARGED
S PRING
L
S
I
N
CHARGED
S PRING
Status Text displays “Charged Spring” when charged.