Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 147)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 147
Frame 14 Mechanical Installation Chapter 10
Move the Common Mode Jumper(s) to the Disconnected Position
Follow the steps below to move the common mode jumper(s) to the
disconnected position for each converter unit (see
Figure 60 on page 141 for
MOV jumper location).
Task Description
Loosen the screws and two fasteners that secure the jumper.
Rotate the jumper to the lower position.
Tighten the screw and two fasteners.
A
B
C
A
B
Rectifying Circuit Board
C
Front View of Converter
Unit