Move the control frame – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives User Manual
Page 143
Advertising
Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
143
Frame 14 Mechanical Installation
Chapter 10
Move the Control Frame
To gain access to the airflow plate and protective covers on the left side converter
unit of the drive you must move the control frame.
Task
Description
Loosen the T8 Torx-head screws that secure the control frame to the drive enclosure.
Swing the control frame out and away from the converter unit.
A
B
B
A
Advertising
This manual is related to the following products: