Move the control frame – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives User Manual
Page 124
Advertising
124
Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
Chapter 9
Frame 13 Mechanical Installation
Remove the Protective
Covers from the Converter
Unit
Move the Control Frame
You must move the control frame in order to access and remove the protective
covers from the drive’s converter unit.
Task
Description
Loosen the T8 Torx-head screws that secure the control frame to the drive enclosure.
Swing the control frame out and away from the converter unit.
A
B
B
A
Advertising
This manual is related to the following products: