Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 73)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 73
Frame 10 Mechanical Installation Chapter 6
Dimensions Figure 22 - Enclosure Code A (NEMA/UL Type 1, IP21) and M (NEMA/UL Type 1, IP21 w/Conformal
Coat)
2275.0
(89.57)
2201.8
(86.68)
606.0
(23.85)
534.7
(21.05)
2234.0
(87.95)
32.3
(1.27)
42.0
(1.65) 498.0
(19.61)
605.5
(23.84)
632.5*
(24.90)
Lifting Holes
116 (4.5)
Gap with
Overlapping
Plate Removed
57.2
(2.3)
Standard
73.3 (2.9)
Max.
144.5
(5.7)
439
(17.3)
83 (3.3)
Stationary metal front bottom plate
Two pieces of soft foam taped to adjacent metal plates
Overlapping metal bottom plate (slightly adjustable)
Stationary metal back bottom plate
Dimensions are in millimeters and (inches).
* This dimension is the depth for drives with the
optional door-mounted HIM installed.
Wire entry for this enclosure is between two pieces of soft foam. If the adjustable plate is slid back, a
gap develops between the foam pieces. Otherwise, the foam acts as a loose gasket around the wires.