Remove the protective covers, Remove screws and covers – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives User Manual
Page 129
Advertising
Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
129
Frame 13 Mechanical Installation
Chapter 9
Remove the Protective Covers
You must remove the protective covers to gain access to the inverter units.
•
Remove the four M5 POZIDRIV screws that secure each of the two or
three main and bottom protective covers to the drive, then remove the
protective covers.
DC B
US CONDUCT
ORS AND CAP
ACIT
ORS
OPERA
TE A
T HIGH
VO
LTA
GE.
REMO
VE PO
WER
AND
WAIT 5 MINUTES BEFORE S
ER
VICING
DANGER
!
DC B
US CONDUCT
ORS AND CAP
ACIT
ORS
OPERA
TE A
T HIGH
VOL
TAG
E. REMO
VE PO
WER
AND W
AIT 5 MINUTES BEFORE SER
VICING
DA
NGER
!
DC B
US CONDUCT
ORS AND CAP
ACIT
ORS
OPERA
TE A
T HIGH
VOL
TAG
E. REMO
VE PO
WER
AND W
AIT 5 MINUTES BEFORE SER
VICING
DANGER
!
Remove screws and covers.
Remove screws and covers.
Advertising
This manual is related to the following products: