Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 89)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 89
Frame 11 Mechanical Installation Chapter 7
Figure 31 - Enclosure Code H (NEMA/UL Type 12, IP54) and W (NEMA/UL Type 12 - IP54 w/
Conformal Coat)
(1)
NEMA/UL Type 12/IP54 Roof Assembly is 242 mm (9.5 in.) for frame 11, 400V 730A and 600V, 590A drives. For these drives, the total
height of the drive is 2443.5 mm (104.5 in.).
678
213
2414.5
806
(31.7)
454
655.04
(26.7)
(8.4)
(95.0)
(25.8)
(18.0)
640
(25.2)
83
(3.3)
153.5 (6.0)
Gap with
Overlapping
Plate Removed
57.2
(2.3)
Standard
73.3 (2.9)
Max.
144.5
(5.7)
Stationary metal front bottom plate
Two pieces of soft foam taped to adjacent metal plates
Overlapping metal bottom plate (slightly adjustable)
Stationary metal back bottom plate)
NEMA/UL Type 12
Roof Assembly
(1)
NEMA/UL
Type 12
External Filters
Dimensions are in millimeters and (inches).
Wire entry for this enclosure is between two pieces of soft foam. If the adjustable plate is slid back, a gap develops between
the foam pieces. Otherwise, the foam acts as a loose gasket around the wires.