I/o cable grounding – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives User Manual
Page 34
Advertising
34
Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
Chapter 2
Control Wiring for PowerFlex 700H Drives
I/O Cable Grounding
When installing shielded multi-conductor for analog and digital I/O, strip the
cable at such a distance from the terminal plug so you can fix the shield to the
cable clamp for grounding.
Position the exposed
shield so it can fixed to
the clamp.
Note: This clamp is not designed for strain relief.
Advertising
This manual is related to the following products: