Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 111)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 111
Frame 12 Mechanical Installation Chapter 8
Move the Common Mode Jumper to the Disconnected Position
Follow the steps below to move the common mode jumper to the disconnected
position (see
Figure 42 on page 110 for jumper location).
Task Description
Loosen the upper screw.
Remove the lower screw.
Move the jumper to the horizontal position.
Install and tighten the screws.
A
B
C
D
A
B
C
D
Rectifier Circuit Board
Front View of Power
Structure