Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 139)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 139
Frame 14 Mechanical Installation Chapter 10
Figure 58 - DC Input Drive Enclosure Code A (NEMA/UL Type 1, IP 21) and M (NEMA/UL Type 1, IP21
w/Conformal Coat)
2232
(88)
601
(23.7)
620
(24.5)
44
(1.7)
2270
(89.4)
1597
(63.0)
675
(26.6)
125 (5.0) 62.25
(2.5)
475
(18.7)
65
(2.6)
30 (1.2)
68.75 (2.7)
799.5 (31.5)
675
(26.6)
Dimensions are in millimeters and (inches).
Wire entry for this enclosure is between two pieces of soft
foam. If the adjustable plate is slid back, a gap develops
between the foam pieces. Otherwise, the foam acts as a loose
gasket around the wires.
Stationary metal front bottom plate
Two pieces of soft foam taped to adjacent metal plates
Overlapping metal bottom plate (slightly adjustable)
Stationary metal back bottom plate