Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 107)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 107
Frame 12 Mechanical Installation Chapter 8
Remove the Airflow Plate
The drive is equipped with a plate, just above the control frame, that directs air
flow through the drive. You may need to remove this plate in order to access the
protective covers and the power terminals. If you do not need to remove the
airflow plate, continue with Remove the Protective Covers on page
108 .
Task Description
Remove the T8 Torx-head screws that secure the airflow plate to the drive.
Slide the airflow plate off of the drive.
A
B
A
B
A