Document Outline

• SAFETY PRECAUTIONS (For N-8000EX/8010EX/8000MI)
• OPERATING INSTRUCTIONS CONFIGURATION
• Chapter 1: GENERAL DESCRIPTION
  • 1. GENERAL DESCRIPTION
  • 2. FEATURES
  • 3. HANDLING PRECAUTIONS
  • 4. SPECIFICATIONS
  • 5. SYSTEM CONFIGURATION
    • 5.1. System Configuration Example
      • 5.1.1. Exchange
      • 5.1.2. Peripheral Components
      • 5.1.3. IP Stations
      • 5.1.4. Stations
      • 5.1.5. Others
    • 5.2. Component Description
      • 5.2.1. Exchange
      • 5.2.2. Peripheral components
      • 5.2.3. IP stations
      • 5.2.4. Stations
      • 5.2.5. Others
    • 5.3. Rack Mounting Examples for Exchanges
      • 5.3.1. A 128-line exchange system
      • 5.3.2. A 192-line exchange system
      • 5.3.3. A 256-line exchange system
      • 5.3.4. A 1280-line exchange system
  • 6. NOMENCLATURE AND FUNCTIONS
    • 6.1. N-8000EX IP Intercom Exchange
      • [Front]
      • [Rear]
    • 6.2. N-8010EX IP Intercom Exchange
      • [Front]
      • [Rear]
    • 6.3. N-8000MI Multi Interface Unit
      • [Front]
      • [Rear]
    • 6.4. N-8500MS IP Multifunctional Master Station
      • [Top]
      • [Rear]
      • [Bottom]
    • 6.5. N-8540DS IP Door Station
      • [Front]
      • [Side]
      • [Rear]
      • [Top]
    • 6.6. N-8000MS Multifunctional Master Station
      • [Top]
      • [Rear]
      • [Bottom]
    • 6.7. N-8010MS Standard Master Station
      • [Top]
      • [Rear]
      • [Bottom]
    • 6.8. N-8011MS Standard Hands-free Master Station
      • [Top]
      • [Rear]
      • [Bottom]
    • 6.9. N-8020MS Industrial-Use Master Station
      • [Top]
      • [Rear]
      • [Bottom]
    • 6.10. N-8031MS Flush-Mount Master Station
      • [Front]
      • [Rear]
    • 6.11. N-8050DS Door Station
      • [Front]
      • [Rear]
  • 7. SYSTEM FUNCTION TABLE
    • 7.1. Basic Functions
    • 7.2. Multi Interface Unit's Functions
  • 8. PAGING FUNCTION OUTLINES
    • 8.1. Paging Types
      • 8.1.1. PA paging (Only when the N-8000EX/8000MI is used)
      • 8.1.2. Station paging
    • 8.2. Paging Functions
      • 8.2.1. Zone paging
      • 8.2.2. Paging
      • 8.2.3. All-call paging
    • 8.3. Station Paging Receiving Mode
      • 8.3.1. Conversation priority mode
      • 8.3.2. Paging priority mode
    • 8.4. Responding to Paging
      • 8.4.1. Automatic response
      • 8.4.2. Zone number dialing
  • 9. MULTI INTERFACE FUNCTION OUTLINES
    • 9.1. External Input Paging
    • 9.2. PA paging
    • 9.3. Tie-line Connection
    • 9.4. PBX Interface (E and M Interface)
    • 9.5. BGM
    • 9.6. Contact Input and Output Functions
      • 9.6.1. External equipment control
      • 9.6.2. Remote dial control
      • 9.6.3. Contact bridge function (external contact interlock)
      • 9.6.4. Paging busy input
      • 9.6.5. System diagnosis
• Chapter 2: FUNCTIONS AND OPERATION
  • 1. BASIC USAGE
    • 1.1. Calling from a Master Station
    • 1.2. Calling from a Door Station
    • 1.3. Receiving a Call
      • 1.3.1. Receiving a call at the master station
      • 1.3.2. Receiving a call at the door station
    • 1.4. Station Speaker Volume
  • 2. CONVERSATION FUNCTIONS AND OPERATION
    • 2.1. Conversation
      • 2.1.1. Hands-free conversation
      • 2.1.2. Handset conversation
      • 2.1.3. PTT conversation
    • 2.2. Calling
      • 2.2.1. Individual calls
      • 2.2.2. Master station calls
      • 2.2.3. Redialing
      • 2.2.4. Recall
      • 2.2.5. Voice callings
      • 2.2.6. Group calls
    • 2.3. Setting Call Receiving Modes
      • 2.3.1. Automatic connection
      • 2.3.2. Continuous call
    • 2.4. Speed Dialing
      • 2.4.1. Auto-dialing (N-8000MS/8500MS only)
      • 2.4.2. One-touch dialing
    • 2.5. Hold
      • 2.5.1. Mic off
      • 2.5.2. Call hold
    • 2.6. Call Transfer
    • 2.7. Automatic Transfer
      • 2.7.1. Group hunting
      • 2.7.2. Absence transfer
      • 2.7.3. Call forwarding
    • 2.8. Remote Response
    • 2.9. Executive Priority
    • 2.10. Time-Out
    • 2.11. Group Blocking
  • 3. PAGING FUNCTION AND OPERATION
    • 3.1. Paging
      • 3.1.1. Zone paging
      • 3.1.2. Paging
      • 3.1.3. All-call paging
      • 3.1.4. Paging priority
    • 3.2. External Input Paging (only when the N-8000MI is used)
    • 3.3. Responding to Paging
      • 3.3.1. Automatic response
      • 3.3.2. Zone number designation response
  • 4. OTHER FUNCTIONS AND OPERATION
    • 4.1. Scan Monitor
    • 4.2. PBX Connection (only when the N-8000MI is used)
      • 4.2.1. Calling the PBX extension telephone
      • 4.2.2. Being called from a PBX extension telephone
      • 4.2.3. Being paged from a PBX extension telephone
    • 4.3. Tie-Line Connection (only when the N-8000MI is used)
      • 4.3.1. Calling another intercom system
      • 4.3.2. Being called from another intercom system
      • 4.3.3. Making paging calls to another intercom system
      • 4.3.4. Being paged from another intercom system
    • 4.4. BGM (only when the N-8000MI is used)
    • 4.5. External Equipment Control (only when the N-8000MI is used)
    • 4.6. Calling Station Indication/CCTV Interlock (only when the N-8000MI is used)
    • 4.7. Door Remote Control (only when the N-8050DS/8540DS/8000MI is used)
    • 4.8. Call- and Talk-Interlocked Contact Output (only when the N-8050DS/8540DS is used)
    • 4.9. Remote Dial Control (only when the N-8000MI is used)
    • 4.10. Contact Bridge (only when the N-8000MI is used)
    • 4.11. Paging Busy Input (only when the N-8000MI is used)
  • 5. MASTER STATION OPERATION TABLE
  • 6. MULTIFUNCTIONAL MASTER STATION'S LCD DISPLAY TABLE
• Chapter 3: INSTALLATION & WIRING
  • 1. INSTALLATION OF THE EXCHANGE
    • 1.1. Equipment Rack Mounting
      • 1.1.1. Setting space
      • 1.1.2. Caution when installing the unit
      • 1.1.3. Exchange mounting
    • 1.2. Desk-Top Installation
    • 1.3. Wall Mounting
  • 2. INSTALLATION OF THE MULTI INTERFACE UNIT
    • 2.1. Equipment Rack Mounting
      • 2.1.1. Setting space
      • 2.1.2. Caution when installing the unit
      • 2.1.3. N-8000MI mounting
    • 2.2. Desk-Top Installation
    • 2.3. Wall Mounting
  • 3. INSTALLATION OF STATIONS
    • 3.1. When Mounting the Station on a Wall
      • 3.1.1. N-8000MS/8010MS/8500MS
      • 3.1.2. N-8020MS
    • 3.2. On-Wall Mounting
      • 3.2.1. N-8000MS/8010MS/8020MS/8500MS
      • 3.2.2. N-8011MS
    • 3.3. Desk-Top Installation
      • 3.3.1. N-8000MS/8010MS/8020MS/8500MS
      • 3.3.2. N-8011MS
    • 3.4. In-Wall Mounting Using an Electrical Box
      • 3.4.1. N-8031MS
      • 3.4.2. N-8050DS/8540DS
    • 3.5. On-Wall Mounting Using a Wall-Mount Box
      • 3.5.1. N-8031MS
      • 3.5.2. N-8050DS/8540DS
  • 4. WIRING
    • 4.1. Exchange Connection
    • 4.2. Station Connection
      • 4.2.1. Station and Exchange connection
      • 4.2.2. Headset plug connection (N-8000MS only)
      • 4.2.3. External speaker terminals and control output terminals connections
      • 4.2.4. N-8031MS and RS-191 connections
      • 4.2.5. N-8031MS and external switch connections
      • 4.2.6. N-8050DS and external relay connections
    • 4.3. Multi Interface Unit Connection
    • 4.4. IP Station Connection
      • 4.4.1. N-8500MS connections
      • 4.4.2. N-8540DS connection
    • 4.5. Type of Cable
    • 4.6. Relations Between Core Diameter of Cable and Maximum Cable Length
    • 4.7. Connector Connection
      • 4.7.1. Mini-clamp connector connection
      • 4.7.2. Terminal plug connection
    • 4.8. E-7000TB Terminal Board Wiring
• Chapter 4: BEFORE PERFORMING SYSTEM SETTINGS⋯
  • 1. SYSTEM SETTING ITEMS AND DEFAULT
    • 1.1. General System
    • 1.2. Exchange
      • 1.2.1. Network settings
      • 1.2.2. Sampling frequency correction
      • 1.2.3. Function settings
    • 1.3. Multi Interface Unit
      • 1.3.1. Network settings
      • 1.3.2. Sampling frequency correction
      • 1.3.3. Function settings
      • 1.3.4. Audio I/O
      • 1.3.5. Contact inputs
      • 1.3.6. Contact outputs
    • 1.4. IP Stations
      • 1.4.1. Network settings
      • 1.4.2. Function settings 1
      • 1.4.3. Function settings 2
      • 1.4.4. Speed dialing
      • 1.4.5. Scan monitor
    • 1.5. Stations
      • 1.5.1. Function settings
      • 1.5.2. Speed dialing
      • 1.5.3. Scan monitor
      • 1.5.4. Paging
      • 1.5.5. Group
  • 2. TURNING THE SYSTEM'S POWER SWITCH ON
    • 2.1. Caution When Turning the Power Switch On
    • 2.2. Turning the Power Switch On
  • 3. SETTING PROCEDURES
  • 4. NETWORK SETTINGS USING A PERSONAL COMPUTER
• Chapter 5: SYSTEM SETTINGS BY SOFTWARE
  • 1. N-8000 SOFTWARE GENERAL DESCRIPTION
    • 1.1. General Description
      • 1.1.1. Equipment scan and network setting functions
      • 1.1.2. System setting function
    • 1.2. PC Network Settings
    • 1.3. Notes on Setting Update
  • 2. INSTALLING SOFTWARE
    • 2.1. System Requirements
    • 2.2. Activating the Setup Guide
    • 2.3. N-8000 Software Installation
      • 2.3.1. Installation
      • 2.3.2. Version update information
      • 2.3.3. Folder configuration
    • 2.4. N-8000 Software Uninstallation
  • 3. ACTIVATING N-8000 SOFTWARE PROGRAM
  • 4. UNIT SCAN (NETWORK SETTINGS)
    • 4.1. Screen Description
    • 4.2. Menu
      • 4.2.1. File
      • 4.2.2. Scan
      • 4.2.3. Help
    • 4.3. Buttons
    • 4.4. Using Unit Scan
    • 4.5. Changing Equipment Settings
    • 4.6. Automatic IP Address Assignment
    • 4.7. Subnet Mask and Default Gateway Settings
  • 5. SYSTEM SETTING FUNCTION
    • 5.1. Screen Description
    • 5.2. Menu
      • 5.2.1. File
      • 5.2.2. Setting
      • 5.2.3. Help
    • 5.3. Overall System Configuration Settings
      • 5.3.1. Equipment registration
      • 5.3.2. Station number and type settings
      • 5.3.3. Network communications registration
      • 5.3.4. Multicast communications registration
    • 5.4. Exchange Settings
      • 5.4.1. Network settings
      • 5.4.2. Sampling frequency correction settings
      • 5.4.3. Function settings
    • 5.5. Multi Interface Unit Settings
      • 5.5.1. Network settings
      • 5.5.2. Sampling frequency correction settings
      • 5.5.3. Function settings
      • 5.5.4. Audio I/O settings
      • 5.5.5. Contact input setting
      • 5.5.6. Contact output setting
    • 5.6. Setting IP Stations
      • 5.6.1. Network settings
      • 5.6.2. Function settings
      • 5.6.3. Speed dialing settings
      • 5.6.4. Scan Monitor settings (IP master station only)
    • 5.7. Setting Stations Connected to the Exchange
      • 5.7.1. Function settings
      • 5.7.2. Speed dialing settings
      • 5.7.3. Scan Monitor settings
    • 5.8. Paging Zone Settings
    • 5.9. Group Settings
      • 5.9.1. Group blocking settings
      • 5.9.2. Remote response group settings
  • 6. WHEN SETTINGS ARE COMPLETED
    • 6.1. Saving Setting Contents to Files
    • 6.2. Uploading Settings
    • 6.3. Downloading Settings
    • 6.4. Printing Settings
  • 7. CHANGING THE PASSWORD
    • 7.1. Changing the System Password
    • 7.2. Changing the Station Maintenance Password
  • 8. SYSTEM CLOCK SETTINGS
• Chapter 6: SYSTEM SETTINGS USING THE BROWSER
  • 1. OUTLINE OF SETTINGS USING BROWSER
  • 2. MENU ITEMS
  • 3. DISPLAYING THE MENU SCREEN
  • 4. NETWORK SETTING
  • 5. OPERATION STATUS DISPLAY
    • 5.1. N-8000EX/8010EX
    • 5.2. N-8000MI
    • 5.3. N-8500MS
    • 5.4. N-8540DS
  • 6. LINE STATUS INDICATION (Only for the Exchange)
  • 7. NETWORK STATUS INDICATION
  • 8. OPERATION LOG
  • 9. STREAM LOG
  • 10. SYSTEM MANAGEMENT
    • 10.1. Changing System Names and Passwords
    • 10.2. Uploading Setting File
    • 10.3. Downloading Setting File
    • 10.4. Updating Firmware
    • 10.5. Clock Settings
• Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS/8500MS ONLY)
  • 1. KEYS USED FOR MENU SCREEN OPERATION
  • 2. MENU ITEMS
  • 3. MONITORING LINE STATUS
  • 4. UPDATING LOG FILES
  • 5. CONFIRMING THE SET SOUND VOLUME (N-8500MS ONLY)
  • 6. SYSTEM SETTINGS
    • 6.1. Entering Maintenance Screen
    • 6.2. Network Settings
    • 6.3. Station Number Settings
    • 6.4. System Clock Settings
    • 6.5. Restarting the Equipment
• Chapter 8: APPENDIX
  • 1. BASIC KNOWLEDGE ABOUT NETWORKS
    • 1.1. IP Networks and Address
    • 1.2. Network Address Port Translation (NAPT, IP Masquerade) and N-8000 Software Program
    • 1.3. Unicast vs. Multicast Communications
    • 1.4. Network Paging Restrictions
    • 1.5. Unit Scan and Broadcast Communications Domains
    • 1.6. Sampling Frequency Correction (N-8000EX/8010EX/8000MI only)
  • 2. IF TROUBLE OCCURS:
  • 3. INDICATOR STATUS & TROUBLESHOOTING
  • 4. SPECIFICATIONS
    • 4.1. N-8000EX IP Intercom Exchange
    • 4.2. N-8010EX IP Intercom Exchange
    • 4.3. N-8000MI Multi Interface Unit
    • 4.4. N-8500MS IP Multifunctional Master Station
    • 4.5. N-8540DS IP Door Station
    • 4.6. N-8000MS Multifunctional Master Station
    • 4.7. N-8010MS Standard Master Station
    • 4.8. N-8011MS Standard Hands-Free Master Station
    • 4.9. N-8020MS Industrial-Use Master Station
    • 4.10. N-8031MS Flush-Mount Master Station
    • 4.11. N-8050DS Door Station
    • 4.12. YC-280 Wall Mounting Bracket
    • 4.13. YC-290 Wall Mounting Bracket
    • 4.14. YC-241 Back Box
    • 4.15. YC-251 Wall-Mount Box
    • 4.16. YC-150 Back Box
    • 4.17. YS-13A Wall-Mount Box
    • 4.18. E-7000TB Terminal Board
    • 4.19. RS-191 Option Handset
    • 4.20. AD-1210P AC Adapter