Hypertherm Powermax105 Service Manual - Manual (Page 279)

Power SuPPly ComPonent rePlaCement
powermax
105 Service Manual 9-81
6. Disconnect the quick disconnect receptacle from the front end panel by removing the four mounting screws.
7. Remove the bolt securing the work cable to the work lead receptacle.
8. Remove the nut and washer securing work lead receptacle to the front end panel.
9. Push the work lead receptacle out through the front end panel.
Quick disconnect
receptacle
Mounting screws (4)
Front end panel
Bolt
Nut
Washer
Work cable
Work lead
receptacle