Hypertherm Powermax105 Service Manual - Manual (Page 300)

Torch componenT replacemenT
10-10
powermax
105 Service Manual
Right handle
Strain relief
Strain relief
Torch lead
Torch lead
Right handle
Remove the start switch
1. Pry the start switch up using a flat blade screwdriver.
2. Disconnect the start switch by pressing the tab on the connector and pulling the start switch away from the
connector.
3. Lift the start switch off the two mounting posts in the right handle.
Replace the start switch
1. Pry the start switch up using a flat blade screwdriver.
2. Lift the start switch off the two mounting posts in the right handle.
3. Plug the start switch connector into the new start switch.
4. Press the start switch onto the two mounting posts in the right handle.
Duramax 75° hand torch
Duramax 15° hand torch
Start switch
Start switch
Start switch
connector
Start switch
connector