Hypertherm Powermax105 Service Manual - Manual (Page 7)

Compliance Information W-1
9/10
Attention
Genuine Hypertherm parts are the factory-
recommended replacement parts for your Hypertherm
system. Any damage or injury caused by the use of other
than genuine Hypertherm parts may not be covered by
the Hypertherm warranty, and will constitute misuse of
the Hypertherm Product.
You are solely responsible for the safe use of the
Product. Hypertherm does not and cannot make any
guarantee or warranty regarding the safe use of the
product in your environment.
general
Hypertherm, Inc. warrants that its Products shall be
free from defects in materials and workmanship for the
specific periods of time set forth herein and as follows: if
Hypertherm is notified of a defect (i) with respect to the
plasma power supply within a period of two (2) years
from the date of its delivery to you, with the exception of
Powermax brand power supplies, which shall be within
a period of three (3) years from the date of delivery
to you, and (ii) with respect to the torch and leads
within a period of one (1) year from its date of delivery
to you, and with respect to torch lifter assemblies
within a period of one (1) year from its date of delivery
to you, and with respect to Automation products
one (1) year from its date of delivery to you, with the
exception of the EDGE Pro CNC, EDGE Pro Ti CNC,
MicroEDGE Pro CNC and ArcGlide THC, which shall
be within a period of two (2) years from the date of
delivery to you, and (iii) with respect to HyIntensity fiber
laser components within a period of two (2) years from
the date of its delivery to you, with the exception of laser
heads and beam delivery cables, which shall be within a
period of one (1) year from its date of delivery to you.
This warranty shall not apply to any Powermax brand
power supplies that have been used with phase
converters. In addition, Hypertherm does not warranty
systems that have been damaged as a result of poor
power quality, whether from phase converters or
incoming line power. This warranty shall not apply to any
product which has been incorrectly installed, modified,
or otherwise damaged.
Hypertherm provides repair, replacement or adjustment
of the Product as the sole and exclusive remedy, if
and only if the warranty set forth herein properly is
invoked and applies. Hypertherm, at its sole option,
shall repair, replace, or adjust, free of charge, any
defective Products covered by this warranty which
shall be returned with Hypertherm’s prior authorization
(which shall not be unreasonably withheld), properly
packed, to Hypertherm’s place of business in Hanover,
New Hampshire, or to an authorized Hypertherm repair
facility, all costs, insurance and freight pre paid by the
customer. Hypertherm shall not be liable for any repairs,
replacement, or adjustments of Products covered by this
warranty, except those made pursuant to this paragraph
and with Hypertherm’s prior written consent.
The warranty set forth above is exclusive and is in
lieu of all other warranties, express, implied, statutory,
or otherwise with respect to the Products or as to
the results which may be obtained therefrom, and
all implied warranties or conditions of quality or of
merchantability or fitness for a particular purpose or
against infringement. The foregoing shall constitute the
sole and exclusive remedy for any breach by Hypertherm
of its warranty.
Distributors/OEMs may offer different or additional
warranties, but Distributors/OEMs are not authorized
to give any additional warranty protection to you or make
any representation to you purporting to be binding upon
Hypertherm.
WARRANty