HEIDENHAIN TNC 620 (73498x-01) ISO programming - Manual (Page 132)

132 Programming: Programming aids
4.6 Er
ro
r messag
es
Informational texts
After a faulty operation, such as pressing a key without function or
entering a value outside of the valid range, the TNC displays a (green)
text in the header, informing you that the operation was not correct.
The TNC clears this note upon the next valid input.
Saving service files
If necessary, you can save the "Current status of the TNC," and make
it available to a service technician for evaluation. A group of service
files is saved (error and keystroke log files, as well as other files that
contain information about the current status of the machine and the
machining).
If you repeat the "Save service files" function with the same file name,
the previously saved group of service data files is overwritten. To avoid
this, use another file name when you repeat the function.
Saving service files:
U Open the error window
U Press the LOG FILES soft key
U Press the SAVE SERVICE FILES soft key: The TNC
opens a pop-up window in which you can enter a
name for the service file
U Save the service files: Press the OK soft key
Calling the TNCguide help system
You can call the TNC’s help system via soft key. Immediately the help
system shows you the same error explanation that you receive by
pressing the HELP soft key.
U Call the help for HEIDENHAIN error messages.
U Call the help for HEIDENHAIN error messages, if
available
If your machine manufacturer also provides a help
system, the TNC shows an additional MACHINE
MANUFACTURER soft key with which you can call this
separate help system. There you will find further, more
detailed information on the error message concerned.