HEIDENHAIN TNC 620 (73498x-01) ISO programming - Manual (Page 472)

472
M109
M110
M111
Constant contouring speed at tool cutting edge
(increase and decrease feed rate)
Constant contouring speed at tool cutting edge
(feed rate decrease only)
Reset M109/M110 X X
M112
M113 Enter contour transition between two contour elements
Reset M112 – X
M114
M115
Automatic compensation of machine geometry when working with tilted
axes
Reset M114 – X, option 08
M116
M117 Feed rate for rotary tables in mm/min
Reset M116 X, option 08 X, option 08
M118 Superimpose handwheel positioning during program run X, option 21 X
M120 Pre-calculate radius-compensated contour (LOOK AHEAD) X, option 21 X
M124 Contour filter – X
M126
M127 Shortest-path traverse of rotary axes
Reset M126 X X
M128
M129
Maintain the position of the tool tip when positioning the tilted axes
(TCPM)
Reset M126 X, option 09 X, option 09
M130 Within the positioning block: Points are referenced to the untilted
coordinate system X X
M134
M135
Exact stop at nontangential contour transitions when positioning with
rotary axes
Reset M134 – X
M136
M137 Feed rate F in millimeters per spindle revolution
Reset M136 X X
M138 Selection of tilted axes X X
M140 Retraction from the contour in the tool-axis direction X X
M141 Suppress touch probe monitoring X X
M142 Delete modal program information – X
M143 Delete basic rotation X X
M Effect TNC 620 iTNC 530