HEIDENHAIN TNC 620 (73498x-01) ISO programming User Manual
Page 458
Advertising
458
M126
M127
Shortest-path traverse of rotary axes
Reset M126
M130 Moving to position in an untilted coordinate system with a tilted working plane
M140 Retraction from the contour in the tool-axis direction
M144
M145
Compensate the machine’s kinematics configuration for ACTUAL/NOMINAL positions at
end of block
Reset M144
M141 Suppress touch probe monitoring
M148
M149
Retract the tool automatically from the contour at NC stop
Reset M148
M
Effect
Effective at block... Start
End
Page
Advertising