HEIDENHAIN TNC 620 (73498x-01) ISO programming - Manual (Page 48)

48 First steps with the TNC 620
1
.5 T
ool set
u
p The pocket table TOOL_P.TCH
In the pocket table TOOL_P.TCH (permanently saved under
TNC:\TABLE\
) you specify which tools your tool magazine contains.
To enter data in the pocket table TOOL_P.TCH, proceed as follows:
U Display the tool table
U Display the pocket table
U Edit the pocket table: Set the EDITING soft key to ON
U With the upward or downward arrow keys you can
select the pocket number that you want to edit
U With the rightward or leftward arrow keys you can
select the data that you want to edit
U To leave the pocket table, press the END key
Further information on this topic
„ Operating modes of the TNC: See "Operating modes" on page 58
„ Working with the pocket table: See "Pocket table for tool changer"
on page 152
The function of the pocket table depends on the machine.
Your machine manual provides more detailed information.