1 overview, 1 ov erview 1.1 overview – HEIDENHAIN TNC 620 (73498x-01) ISO programming User Manual
Page 34
Advertising
34
First steps with the TNC 620
1
.1 Ov
erview
1.1 Overview
This chapter is intended to help TNC beginners quickly learn to handle
the most important procedures. For more information on a respective
topic, see the section referred to in the text.
The following topics are included in this chapter:
Machine switch-on
Programming the first part
Graphically testing the first program
Tool setup
Workpiece setup
Running the first program
Advertising