Define the plane function, Position display – HEIDENHAIN TNC 620 (73498x-01) ISO programming User Manual
Page 309
HEIDENHAIN TNC 620
309
1
1
.2 The PLANE function: Tilting the
w
or
king plane (sof
tw
ar
e option 1)
Define the PLANE function
U
Show the soft-key row with special functions
U
Select the PLANE function: Press the TILT MACHINING
PLANE soft key: The TNC displays the available
definition possibilities in the soft-key row
Selecting functions
U
Select the desired function by soft key. The TNC continues the
dialog and requests the required parameters
Position display
As soon as a PLANE function is active, the TNC shows the calculated
spatial angle in the additional status display (see figure). As a rule, the
TNC internally always calculates with spatial angles, independent of
which PLANE function is active.
During tilting (MOVE or TURN mode) in the Distance-To-Go mode (DIST),
the TNC shows (in the rotary axis) the distance to go (or calculated
distance) to the final position of the rotary axis.