HEIDENHAIN TNC 620 (73498x-01) ISO programming - Manual (Page 425)

HEIDENHAIN TNC 620 425
16.4 Set
ting the data int
e
rf
aces
Software for data transfer
For transfer of files to and from the TNC, we recommend using the
HEIDENHAIN TNCremo data transfer software. With TNCremo, data
transfer is possible with all HEIDENHAIN controls via the serial
interface or the Ethernet interface.
System requirements for TNCremo:
„ PC with 486 processor or higher
„ Windows 95, Windows 98, Windows NT 4.0, Windows 2000,
Windows XP, Windows Vista operating system
„ 16 MB RAM
„ 5 MB free memory space on your hard disk
„ An available serial interface or connection to the TCP/IP network
Installation under Windows
U Start the SETUP.EXE installation program with the File Manager
(Explorer)
U Follow the setup program instructions
Starting TNCremo under Windows
U Click <Start>, <Programs>, <HEIDENHAIN Applications>,
<TNCremo>
When you start TNCremo for the first time, TNCremo automatically
tries to set up a connection with the TNC.
You can download the current version of TNCremo free of
charge from the HEIDENHAIN Filebase
(www.heidenhain.de, <Services and Documentation>,
<Software>, <PC Software>, <TNCremoNT>).