HEIDENHAIN TNC 620 (73498x-01) ISO programming - Manual (Page 466)

466
Programming aids:
„ Help graphics for cycle programming „ X, can be switched off
via config datum „ X
„ Animated help graphics when PLANE/PATTERN DEF function is
selected „ – „ X
„ Help graphics for PLANE/PATTERN DEF „ X „ X
„ Context-sensitive help function for error messages „ X „ X
„ TNCguide: Browser-based help system „ X „ X
„ Context-sensitive call of help system „ – „ X
„ Calculator „ X (scientific) „ X (standard)
„ Comment blocks in NC program „ X „ X
„ Structure blocks in NC program „ X „ X
„ Structure view in test run „ – „ X
Dynamic Collision Monitoring (DCM):
„ Collision monitoring in Automatic operation „ – „ X, option 40
„ Collision monitoring in Manual operation „ – „ X, option 40
„ Graphic depiction of the defined collision objects „ – „ X, option 40
„ Collision checking in the Test Run mode „ – „ X, option 40
„ Fixture monitoring „ – „ X, option 40
„ Tool carrier management „ – „ X, option 0
CAM support:
„ Loading of contours from DXF data „ – „ X, option 42
„ Loading of machining positions from DXF data „ – „ X, option 42
„ Offline filter for CAM files „ – „ X
„ Stretch filter „ x „ –
MOD functions:
„ User parameters „ Config data „ Numerical structure
„ OEM help files with service functions „ – „ X
„ Data medium inspection „ – „ X
„ Loading of service packs „ – „ X
„ Setting the system time „ – „ X
„ Select the axes for actual position capture „ – „ X
„ Definition of traverse range limits „ – „ X
„ Restricting external access „ – „ X
„ Switching the kinematics „ – „ X
Function TNC 620 iTNC 530