Yaskawa i80M Appendix - Manual (Page 126)

9.1 PARAMETER NUMBER LIST (Cent’d)
Negative direction of external deceleration (X-axis to 5th axis).
Number of high speed mode operation control axes.
Number of pulses per revolution of PG (X-axis to 5th axis).
Number of teeth of Gear A on the spindle side usable in solid tap.
Number of teeth of the intermediate gear of Gear B usable solid tap.
Number of teeth of the spindle intermediate gear of Gear A usable in solid tap.
Number of teeth on the motor side of Gear A usable in solid tap.
Number of teeth on the motor side of Gear B usable in solid tap.
Number of valid servo axes.
Number of valid spindle axes.
Number of teeth of the motor intermediate gear of Gear A usable in solid tap.
Numerical value of program number.
Offset of automatic mode handle.
One graduation feed speed change of digit specified manual pulse generator.
Operating mode specification of high speed mode operation.
Operation expression of direct input operation of work piece measurement value.
Optional stop switch.
Output device specification.
Output of leading O when high order variable of D’PRINT function is O.
Output port specification.
Peak value display of synchronous error of the spindle and Z–axis during
solid tap.
Pitch dwell time (Canned cycle G73).
Pitch dwell time of G83.
Pitch error offset incremental/absolute.
Pitch error offset interval (X-axis to 5th axis).
Pitch error offset multiplying factor (X-axis to 5th axis).
Pitch error end memory No. (X-axis to 5th axis).
Pitch error reference point memory No. (X-axis to 5th axis).
Pitch error start memory No. (X-axis to 5th axis).
Pitch error valid/invalid (X-axis to 5th axis).
Playback switch.
Position at which JOG feedrate parameter is increased 10 times.
Position at which JOG feedrate parameter value is reduced to 1/10.
Positioning operation of canned cycle
or
Positive direction of external deceleration (X-axis to 5th axis).
Preset of work coordinate shift (When power switched on).
Preset of work coordinate shift (When reference point return is completed).
#5004 (DO)
#1200
#1831
#1841
#1515
#1511
#1513
#1514
# 1300
#1301 (DO)
#1512
#3005
#2002 (DO)
#2111
#4160
#4010
#0001 (DO)
# 0 0 1 0 ( D 4 )
#4009
# 0 0 0 9 ( D 4 )
#4015
#4017
#0401
#6001 (DO)
#6801
#6101
#6411
#6421
#6401
#6000 (DO)
#0005
#2433
#2434
#4016
#5002 (DO)
#4001
#4001
– 126 –