Yaskawa i80M Appendix User Manual
Page 133
Parameter No.
N A M E
#ooo4
(Bit No.
1/0 data
setting for
port 1
I
FEED
TVCNT
7
0 :
1 :
0 :
1 :
0 :
1 :
0 :
1 :
0 :
1 :
0 :
1 :
0 :
1 :
0 :
1 :
5
4
3
2
1
Outputs EOB as CR and LF when outputting 1S0 code.
Outputs EOB as LF when outputting 1S0 code.
Adds TH check when outputting ISO code by YE tape
reader.
TH check not added when outputting 1S0 code by YE
tape reader.
Feed not added when outputting tape.
Feed added when outputting tape.
TH check executed when inputting 1S0 code.
TH check not executed when inputting 1S0 code.
Items in parenthesis not counted in TV
Items in parenthesis counted in TV check.
TV check not executed.
TV check executed.
Outputs tape code with 1S0.
Outputs tape code with EIA.
When NC data specific control is not provided at
verifica-
tion, the values of #0004 and #0006 are determined as the
following bit values, disregarding the parameter values.
NC data specific control parameter (1: Provided, O: Not
provided)
1st port input #0012
2nd port input #0017 (d7)
1st port output #0014
2nd port output #0019 (d7)
(1) Input #0004
(all) to (d3) =0
#0006
(2) output
[ { ( a l l ) ,
=
#0006
–
1 3 3
–