Yaskawa i80M Appendix - Manual (Page 23)

Alarm No. Contents
—
#oIll
MULTI PLE M CODE
. .
Command is for multiple Mcodes although there is no one block
multiple command option.
M CODE DIGITS OVER
Number of M digit is excessive.
FORMAT ERROR
. . .
P is not specified in the M91 b l o c k .
#ol 15
#0116
INTERNAL M ERROR
There is error in internal M code command.
ERROR
or M91 was used although it was unavailable.
Ml 91 FORMAT ERROR
Input command contains an error.
M93 COMMAND ERROR
Command M93was used although itwas unavailable. (Option is
I
#0118