Yaskawa i80M Appendix - Manual (Page 252)

9.2 PARAMETER NUMBER TABLE (Cent’d)
Parameter No. N A M E
HSAVE DSAVE TLCC
(Bit No. 6 5 4 3 2 1 o )
Note 1: When #4011 (Dl)
Sets reset, reference point return and H code to 00.
Saves reset, reference point return and H code.
Sets D code to 00 when resetting.
Saves D code when resetting.
The block to be read next becomes valid when the offset
value changes.
The H (D) code to be read next becomes valid when the
offset value changes.
O : When there is an offset with G45 to G48, this is with reset of
1: When there is an offset with G45 to G48, this is not with reset of
G92.
Note 2: When = O
0: When there is an offset with G45 to G48, this is with reset of
1: When there is an offset with G45 to G48, this is not with reset of
G92.
– 2 5 2 –