Yaskawa i80M Appendix - Manual (Page 213)

Parameter No. N A M E
Sets numerical value of jog feedrate parameter to x and x 100.
Setting : = 1 multiplying
Setting range : 1, 10, 100
Specifies switch position from which to multiply under #2432 O.
Setting range : 0 to 31
Position specification to multiply the jog feedrate parameter
numerical value b y 1/10.
If #2433 and #2434 are set simultaneously, #2434 has a priority.
Setting range : 0 to 31
1
Speed during execution of skip.
Setting :
I = 1 = 0.1 in. /rein, or =
Setting range : 0 to 32767
r
I 1 1
I #2443 I
I I I
r I
Speed in relation to rapid traverse external deceleration.
Setting : = 1 mm/min, 1 = 0.1 in. /rein, or 1 = 0,001 deg/min
Setting range : 0 to 32767
Speed in relation to external deceleration of feedrate.
Setting : 1 = 1 mm/min, = 0.1 in. /rein, or 1 = 0.001 deg/min
Setting range : 0 to 32767
– 213 –