Yaskawa i80M Appendix User Manual
Page 243
Parameter No.
N A M E
POG08A
PONG04
(Bit No.
7
6
5
4
3
2
1
o
)
1 :
1 :
Sets the G code of the
03
group in accordance with #4000
when resetting.
Sets the G code of the 03 group as the G code of the
command immed
prior when resetting.
Sets the G code of the 02 group as G17 when resetting.
Sets the G code of the 02 group as the G code of the
command immediately prior when resetting.
G
code of the
08
group
O 0 G49
O 1 G43
when power is switched on.
0 G44
Sets G code of 04 group as G98 when power is switched on.
Sets G code of 04 group as G99 when power switched on.
Sets G code of 03 group as G90 when power is switched on.
Sets G code of 03 group as G91 when power is switched on.
Sets G code of 01 group as GOO when power is switched on
and when reetting.
Sets G code of 01 group as GO1 when power is switched on
and when resetting.
– 2 4 3 –