Yaskawa i80M Appendix - Manual (Page 127)

[ P ]
Processing during interruption check (diameter correction).
Processing interruption point return switch.
Processing when O number already exists during tape load.
Program
Program
Program
( R ]
end of end M code during tape load.
restart approach speed.
restart switch.
Rapid feedrate of external deceleration.
Rapid traverse override rate (FO to F2).
Rapid traverse rate (X-axis to 5th axis).
Rapid traverse rate until completion of first reference point return after
switching on the power.
Reference point position (2nd to 4th).
Reference point return (X-axis to 5th axis).
Reference point return approach speed (X-axis to 5th axis).
Reference point return creep speed (X-axis to 5th axis).
Reference point return direction (X-axis to 5th axas).
Reference point return travel distance (X-axis to 5th axis).
Reset operation of macro common variable #100 to #299.
Reset output when emergency stop input is ON.
Return to setup point.
Rewind of NC program with a rewind signal.
Rewind with M30 when RS232C YASNAC standard tape reader is connected
general purpose input
general purpose input
general purpose input
RS232C general purpose input
RS232C general purpose input
RS232C general purpose input
general purpose input
RS232C general purpose input
NC intrinsic data control (First).
control-code control (First ).
bit length (First).
BPS setting (First).
DR line control (First).
parity bit (First).
RTS control (First).
stop bit (First ).
C general purpose output bit length (Second).
RS232C general purpose output BPS setting (Second).
general purpose output control-code control (Second).
general purpose output DR line control (Second).
general purpose output NC intrinsic data control (Second).
RS232C general purpose output parity bit (Second).
general purpose output RTS control (Second).
general purpose output stop bit (Second).
#4013 (D4)
#0005 (D2)
#3005 (DO)
#3005 (D3)
#4015
#0005
#2444
#2447
#2801
#2000
#6811
#4022 (DO)
#2521
#2531
#4002
#4451
#4009
#5000 (D2)
#0005 (D4)
#5000
#4008
#0012
#0012 (DO)
#0011 (D4)
#0011 (DO)
#0012 (D2)
#0011
#0012
#0011
#0013 (D4)
#0013 (DO)
#0014 (DO)
#0014 (D2)
#0013
#0014
#0013 (D3)
– 1 2 7 –