Yaskawa i80M Appendix - Manual (Page 258)

9.2 PARAMETER NUMBER TABLE (Cent’d)
Parameter No. N A M E
G76DWL TPOVR G76M05
(Bit No. 7 6 5 4 2 1 o )
O : Pitch dwell time #401 invalid.
1: Pitch dwell time #401 valid.
O : dwell time #400 invalid.
G76/G77 time valid.
O : Spindle override during execution of G74 and G84 tab
cycle is fixed during initial read.
1: Spindle override during execution of G74 and G84 tab
cycle is 100% fixed.
O : Does not output M05 before outputting with
Outputs M05 before outputting with
– 2 5 8 –