Yaskawa i80M Appendix User Manual
Page 236
Advertising
9.2 PARAMETER NUMBER TABLE (Cent’d )
Parameter No.
N A M E
Set second line of title display by the same procedure as in #3400 to
#3409 when switching on power.
Place the multiplying factor of the first line in the first digit
(Range 1 to 3).
Place the multiplying factor of the 2nd line in the second digit
(Range 1 to 3).
Uses hexadecimal for the 2 digit value and sets this value after
converting to decimal value.
(Setting example) Set 12 H = 18 when the first line is x 2 and the
second line is x 1.
– 2 3 6 –
Advertising