Yaskawa i80M Appendix - Manual (Page 129)

Spindle matching check when changing from rapid feed to cutting
Spindle No. for solid tap.
Spindle output sequencer loop.
Spindle override percentage.
Spindle override when executing G84, G74 tab cycle.
Spindle override 100% clamp when tapping.
Spindle position loop gain.
Spindle rotation parameter multiple X 10.
Spindle servo control system PG (main axis).
Spindle servo control system servo control (main axis).
SSTP polarity when spindle S command input-output is O.
START LOCK swich.
Stored stroke limit inhibited area.
Stored stroke limit inside/outside inhibited.
Stored stroke limit minus (X-axis to 5th axis).
Stored stroke limit (X-axis to 5th axis).
Stored stroke limit switch axis No. (2nd to 5th).
Stored stroke limit valid/invalid. (2nd to 5th). ,
Stroke monitor (X-axis).
Symbol of incremental input of amount of work coordinate shift.
[ T )
Tape code output
TG (X-axis).
TH check during 1S0 code input.
TH check during ISO code output.
Threading cutting variable speed bias (X-axis to 5th axis).
Time from clearing of base block to release of brake when servo power is
switched on.
Time from falling of emergency stop to base block OFF.
Time from sending M, S, T codes to sending of MF, SF, and TF .
Title display first line.
Title display multiplying factor.
Title display second line.
Title display start position.
TLM bottom level.
Tool pot display No..
TV Check.
Types of rapid traverse overrides.
Universal position display by coordinate settings.
Unslotted servo spindle to 6th).
Upper limit check of offset value.
#1000 (D7)
#1240
#1003
#4017
#4017 (D2)
#1417
#1002 (DO)
#1039
#1039
#1000
#0001
#0831
#0008
#6911
#6901
#6111
#0008
#1044
#4012
#0004 (DO)
# 1 0 4 4 ( D 7 )
#0004
#0004
#2831
#5400
#5401
#5410
#3400
#3420
#3410
#3421
#0807
#3422
#0004
#2000
#3000 (DO)
#4010